FishSpy

How to use FishSpy as feature confirmation tool – Dave Lane

As part of his series on using the new FishSpy underwater camera, expert UK carp angler Dave Lane reveals how he uses his camera as a confirmation tool.

Image: Carp-Talk

Image: Carp-Talk

Personally often use the FishSpy camera as a confirmation tool rather than a general feature finder, like a standard marker float or, in my case, just a heavy lead on a braided mainline.
After casting around the swim and identifying a likely area, I would then clip up the braid onto the spool and retrieve before attaching the FishSpy and re-casting to the clip using the same back marker, as in a tree, bush or pylon.

This way I can keep disturbance to a minimum and reduce the risk of losing the FishSpy on a snag or to a crack off due to repeated and unnecessary casting. Using this process recently, I found what felt like a gravel bar running through an otherwise quite weedy area.

On closer inspection, using the camera float, I discovered that it was actually a sand bar dotted with occasional stones and each stone was completely surrounded by a ring of attached zebra mussels; thousands of the things.

Zebra Mussels in their thousands

Zebra Mussels in their thousands.

Obviously this could be an area where the carp would feed of the natural food but, more importantly, the camera had identified a potential hazard.

Had I been planning to fish the gully at the back of the bar then my line would have been running across a multitude of extremely sharp crustaceans and potentially cut through, or been trapped, if I had hooked a carp.

Simply adding a strong snag leader would alleviate the problem but, if not for the footage, I would not have known this until it was too late.

In the video below Dave Lane uses a FishSpy camera on a winter gravel pit venue, and reveals the true nature of the bottom for the very first time:

Leave a Comment

Your email address will not be published. Required fields are marked *